FEP Encapsulated Incoloy 825 Hydraulic Control Line Flatpack Imaj Prezantasyon

FEP Encapsulated Incoloy 825 idwolik kontwòl liy Flatpack

Deskripsyon kout:

Liy kontwòl yo te sibi devlopman anpil, ki gen ladan tès kraze ak simulation otoklav wo-presyon.Tès kraze laboratwa yo te demontre chaj ogmante anba ki tib ankapsile ka kenbe entegrite fonksyonèl, patikilyèman kote "fil eksepsyonèl" fil-fil yo itilize.

Voye imèl ba nou

Pwodwi detay

Tags pwodwi

Gwosè Tib tipik

Dyamèt deyò nan liy kontwòl se sitou 1/4 '' (6.35mm).

Epesè miray: 0.035'' (0.89mm), 0.049'' (1.24mm), 0.065'' (1.65mm)

Tib liy kontwòl disponib nan longè soti nan 400 pye (122 mèt) jiska 32,808 pye (10,000 mèt).Pa gen soude orbital bou.

Lòt espesifikasyon (1/8'' rive 3/4'') disponib sou demann.

Ekspozisyon pwodwi

FEP Encapsulated Incoloy 825 Hydraulic Control Line Flatpack (1)

FEP Encapsulated Incoloy 825 Hydraulic Control Line Flatpack (2)

Karakteristik alyaj

Karakteristik

Ekselan rezistans nan diminye ak oksidasyon asid

Bon rezistans nan estrès-korozyon fann

Rezistans satisfezan nan atak lokalize tankou pitting ak kreve korozyon

Trè rezistan nan asid silfirik ak fosfò

Bon pwopriyete mekanik nan tou de chanm ak tanperati ki wo jiska apeprè 1020 ° F

Pèmisyon pou itilize veso presyon nan tanperati miray jiska 800 °F

Rektangilè pwofil Flatpack Encapsulation

1/4'' OD, 2 liy	0.710'' x 0.410'' (18.0mm x 10.4mm)
1/4'' OD, 3 liy	0.990'' x 0.410'' (25.1mm x 10.4mm)
3/8'' OD, 2 liy	0.960'' x 0.535'' (24.4mm x 13.6mm)
1/2'' OD, 2 liy	1.200'' x 0.660'' (30.5mm x 16.8mm)

Dimansyon tolerans

ASTM B704 / ASME SB704, Incoloy 825, UNS N08825
ASTM B751 / ASME SB751
Gwosè OD	Tolerans OD	Tolerans WT
1/8''≤OD<5/8''(3.18≤OD<15.88mm)	± 0.004 '' (± 0.10 mm)	± 12.5%
5/8≤OD≤1'' (15.88≤OD≤25.4mm)	± 0.0075 '' (± 0.19 mm)	± 12.5%

Meilong Standard
Gwosè OD	Tolerans OD	Tolerans WT
1/8''≤OD<5/8''(3.18≤OD<15.88mm)	± 0.004 '' (± 0.10 mm)	± 10%
5/8≤OD≤1'' (15.88≤OD≤25.4mm)	± 0.004 '' (± 0.10 mm)	±8%

ASTM B423 / ASME SB423, Incoloy 825, UNS N08825
Gwosè OD	Tolerans OD	Tolerans WT
1/8''≤OD<3/16''(3.18≤OD<4.76mm)	+0.003'' (+0.08 mm) / -0	± 10%
3/16≤OD<1/2'' (4.76≤OD<12.7mm)	+0.004'' (+0.10 mm) / -0	± 10%
1/2''≤OD≤1'' (12.7≤OD≤25.4mm)	+0.005'' (+0.13 mm) / -0	± 10%

Meilong Standard
Gwosè OD	Tolerans OD	Tolerans WT
1/8'' ≤OD<3/16'' (3.18≤OD<4.76mm)	+0.003'' (+0.08 mm) / -0	± 10%
3/16≤OD<1/2'' (4.76≤OD<12.7mm)	+0.004'' (+0.10 mm) / -0	± 10%
1/2''≤OD≤1'' (12.7≤OD≤25.4mm)	+0.004'' (+0.10 mm) / -0	±8%